Navigation  
 

JINHASS KM-310 is an acrylic impact modifier with a core/shell structure in which core being moderate cross linked structure is linked with shell by grafting copolymerization. JINHASS KM-310 is designed to improve the impact strength of rigid PVC products and accelerate fusion characteristics under less damaging the inherent properties of PVC resin. It offers unique benefits for rigid PVC applications such as window profiles, pipes, fittings, window frames, house siding, fence and injection moulding etc.

JINHASS KM-310 offers the following benefits

  1. Excellent weatherability
  2. Better impact strength
  3. Lower post-extrusion shrinkage
  4. Outstanding surface quality
  5. Better thermal stability

Typical properties:

No.

Item

Unit

Result

1

Appearance

---

White Powder

2

Volatile Level

Wt %

1.0%

3

Particle Size

(0.425 mm mesh on)

%

2.0%

4

Bulk Density

g/cm3

0.40

Improve fusion behavior

JINHASS KM-310 could improve the PVC fusion behavior. It will make PVC fusion more uniform, further improve the surface gloss and product quality. Fig.1 shows KM-310 could accelerate the PVC fusion.
jinhass

Impact efficiency

JINHASS KM-310 as an acrylic impact modifier is good compatible with PVC so that it can be dispersed uniformly in PVC matrix. Fig.2 and Fig.3 clearly shows JINHASS KM-310 imparts excellent impact improvement both at different testing temperature. The efficiency of JINHASS KM-310 is much higher than that of competitive products.

PVC formulation: PVC(K65) 100phr/TM-181FS 1.4phr/CaSt 1.8phr/TiO2 9.5hr/Paraffin wax 0.6phr/G60 0.67phr/G32 1.35phr/CaCO3 2phr/AIM 6.0phr.
jinhass

Safe Handing Recommendations

JINHASS KM-310 should be kept away from flames, hot pipes, heaters or other sources of heat. Adequate precautions should be taken to keep all dust levels below values that are hazardous to health and safety. In case of eye or skin contact, eyes should be flushed with water to remove dust particles and affected skin areas washed with soap and water.

These suggestions and data are based on information we believe to reliable. They are offered in good faith but, as conditions and methods of use our products are beyond our control, JINHASS COMPANY,LTD. MAKES NO WARRANTIES, EITHER EXPRESS OR IMPLIED, CONCERNING THE FINAL END-USE PRODUCT.

JINHASS COMPANY,LTD. EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. We recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale. Suggestions for uses of our product or the inclusion of descriptive material from patents and the citation of specific patents in this publication should not be understood as recommending the use of our products in violation of any patent, or as permission or license to use any patents of JINHASS Company,LTD.

Jin Hass Products News Center EHS
Our Company Affair Performance of EHS
Our Culture
Our News EHS Accouter
Our Valves
Contact Us
Personnel Hiring
CopyRight (C) 2010-2011 Weihai Jinhass Chemical Co., Ltd   ADMIN